November 18 19 Beaufort to Harbor Town on Hilton Head and Lay Day There 23 2 NM

I had planned to leave Beaufort at 2 p.m. on the 18th and arrive in an anchorage off Cumberland Island in the St. Marys, Florida area about 10 a.m. on the 19th. But the Admiral was wiser in light of predicted 29 degree temperature at night, so we made the short hop in the ICW to Hilton Head and put in to its Harbor Town Yacht Basin, in the Sea Pines Resort, where in addition to golf and a health club, they have heat.

My brother, who lives in the Atlanta area, brings his family here every year and it would have been great to see him here but it is a long drive, he comes in the summer and this is definitely not summer. The developers did a good job of saving the majestic old trees bearded with moss. Most of the housing is vacant for the off season now; this place must be a big traffic jam in season.

The trip was cold but uneventful. I had on many layers to keep warm, topped off by heavy weight foulies which keep out the wind and keep in the body warmth. We saw porpoises, but that is an everyday occurrence hereabouts. Later I learned the cause of the unusual, to me, activity of the porpoises in Big Tom Creek. They hunt for food in packs, herd the little fish together and than eat away. We were passed by this shrimper with his nets out to starboard.

I wonder how he can go straight with that much drag so far to starboard.  We passed Parris Island, the famous Marine base.We used the small jib to ease the engine except when transiting Port Royal Sound, where the wind was on our nose. It was a four hour trip with Lene in the cockpit with me after it warmed up a bit, for the second half.

The marina is a circular affair carved out of the land with an unofficial tourist lighthouse at its side. Four dollars to climb to its top.

Next, the other ILENE is in the center, from the top.

On the lay day I visited the health club, 0.9 miles walk from the marina, for my first workout since early October. I may have done a bit too much but the muscles will work in out through sailing. And I cleaned and waxed the port side rubrail, because we are port side to the dock here.
They have good restaurants here. We dined aboard our first night and at the Topside Restaurant in the marina, (Extraneous lights at top are reflections of the restaurants internal lights on their window -- you can see how calm it has become.)

We were joined by Joe and his wife Sol, from "Solshine" their 42 foot Catamaran (25 feet wide) tied up near us, after sharing a bottle of wine aboard the cat. There we met their dog and cat, but I forgot to take their photos; so next time. They are retired from teaching school and computers and recently sold their land base in suburban Virginia so Solshine is their only home.

I had met them in the laundry room at Beaufort, and now here. Their son is in medical school.

Our current plan is to leave mid day tomorrow and get to St. Marys early the next day. So the jack lines, and preventers must be rigged in the morning and the harnesses and tethers gotten out, despite winds predicted to be so light that they will force this to be a motoring passage. But warm.

Read More..

HYC Cruise Days 14 15 August 7 and 8 Port Jeff LI to Centerport LI and Lay Day There 18 1 Miles

ILENE hauled anchor at 10:45 and was passed by North Star only about two miles outside PJ inlet. Waves from aft gave North Star a roly ride. The wind was broad on ILENEs starboard quarter and while only about 10 knots true, was strong enough to push us on a course close to the entrance to Huntington Bay. There we jibed and continued sailing until the narrow, well marked entrance to Northport Bay. Another good sailing day with enough time to go slow. We were on our mooring at three.

We saw North Star, a few moorings away and chatted a while in the Centerport YC bar with PC Bruce and Dianne, before taking the launch to town to explore. Another postcard run. 


The Centerport YC is on a peninsula projecting northward into Northport Bay. Centerport Harbor is on the west side and Northport Harbor is on the east side of the peninsula, but both Northport and Centerport YCs are in Northport Harbor, which is nicely protected by high hills on with sides. There is a channel between them, visible in this picture taken from Seymours Dock.


We learned that Dana and Ellen of Frabjous were on a mooring here. But it was an evening when everyone did their own thing, with the big dinner celebration the next night. Unfortunately, Frabjous had to go to Seacliff YC on the 8th, so we did not have the opportunity to break bread with them. The waters surface was still as a morgue and the heat of the day switched into a light blanket night.

On the lay day our group was enlarged by the arrival of No News with Ken and Camille, last seen several days ago. 

"Sangaris" arrived with PC Craig and Katherine and PC Erwin as well as their friend Bill, who had made great time up from South Florida in the past three weeks. Also in our party at dinner were Doug and Hedy of "Hurley" and Walt and Rita of "Into The Mystic". These Harlemites joined us by land, not by sea. We all enjoyed the company of each other in the dining room of the elegant Centerport YC, which provides excellent service.

 They printed up a special menu for us. 


But I have to tell ya, the food is better at the Harlem.


 

Walter, Rita, Diane, Bruce, Doug, Hedy, Ken and Camille.


PC Erwin, PC Craig, Katherine, Bill and Lene.
We also met two other former Harlemites who were at the club on their boats: Rick, who has joined the Norwalk YC after moving "Messing About" to Connecticut, and Bruce and Linda of "J-Erica" with the Huguenot YC. 

Another blissfully peaceful night to sleep aboard.

Read More..

Fitting Out A Newly Built Boat

Fitting out a new boat can be difficult and very very expensive.I have known people to buy $20,000 boats and then drop another $50,000 to $60,000 on refits before they even touch water.Well my boat will cost around $3500 for the completed bare hull and cabin. See my post "Spira International 27 Foot Boat Plans Build Costs".Im looking at another $2,000 for paint,finish,and interior,and roughly $2,000 for powering the boat.So what about electronics.This is a difficult one to put a price on.The one system that you want to be all new is the waste,water, and plumbing system.This could give you tainted water,flood your boat, and/or make it stink like a sewer,if old equipment is used.Pumps maybe ok with a good cleaning,but tanks and piping need to be all new.

Understanding Boat Plumbing and Water Systems

First,how will the boat be used?For the first two or three years,the boat will be trailered to lakes and coastal areas.Eventually,it will be used to do "The Great Loop Cruise". Knowing how I will use the boat and when I may need to make upgrades helps a lot.I can resell my old equipment, when I upgrade, to recoup some cost.To do this, I will have to buy decent quality reliable products and maintain them in as new condition as possible.Ive rarely ever had problems taking care of things.

 The Great Circle Route

Second thing,the power plant.Jeff Spira,the designer of my boat, recommends an outboard for power.I have some issues that make outboards a bit of a challenge to use as a means of propulsion.My area has a strict ban on two stroke outboards.That leaves me trying to find a four stroke with controls and gauges.Four strokes are a relatively new thing and used set ups are still fetching top dollar.I cant afford to pay around $10,000 for a 90 horsepower four stroke outboard set up.After consulting with Jeff Spira,he has approved the use of a sterndrive.These are plentiful in my area and cheap,relatively speaking.A good complete four cylinder 140 horsepower 3.0L Mercruise set up goes for between $1500 and $3000.

Third thing,I have a plan to cut costs,get most of the stuff I need,and possibly make a little money back.I will buy a donor boat that is complete and running good.I can find sterndrive boats in good operating condition between $1000 and $6000.Some even have twin sterndrives.That would give me a few options.1)Sell the extra sterndrive set up. 2)Keep the extra sterndrive set up as a back up. 3)Clean up both sterndrive set ups,sell them,and buy a completely new set up.My choice would be the 140 horsepower diesel Volvo Penta D3-140 sterndrive set up.These are hard to find on the used market and most are damaged.New they start out around $12,000.A new 3.0L Mercruise sterndrive set up runs $6000 to $8000.On rare occasions,they can be had for around $5000 to $5500,but come with a catch.They must be set up by a factory Mercruise service center.

Stern Drive Manuals

The donor boat.This is tricky depending on location or region.Most boats here are bow riders or water sport boats.All tho,its not unusual to find cuddy or cabin cruisers for really good prices.Beware that a lot of boats are not properly maintained, and thats the reason they are for sell.Of course, one can get lucky at times and buy a boat that barely needs anything to be back on the water.Look for soft spots in the transom and floor.If they are soft then the stringers and flotation foam have been compromised,and the boats structure has been compromised.This is a good negotiating point.It is really expensive and labor intensive prospect to gut a hull for transom and stringer replacement.

What can be used from the donor boat?This depends on what boat is decided on to be the donor.When building a boat you need everything.

Heres what I look for in a donor.
Power Plant-must be running with all controls and gauges.
Electronics-VHF,depth sounder,radar,gps,etc... in operating conditon.
Pumps-Wash down,bilge,fresh water,black water,and grey water.
Electrical-Batteries,inverter,charger,genset,breaker panel,fuse panel,switches.
Windows-I plan to build my own to fit my boats design.
Bimini Top and canvas-It wont fit the boat,but it can be modified and save some money.Resell is an option.
Interior-Its hard to reuse interiors but they can be modified to work.
Thru Hulls-Pure preference,but I want bronze if theyre under water,and stainless steel above water.Plastic ones crack and fail.
Anchor,Rode,Bow Pulpit,and Windlass-These can usually be modified to work.
Heads(Toilet)-These things are a pain,save yourself the headache,buy new.
Sinks,Faucets,Showers-If these are in good condition,I will use them.I prefer stainless steel.
Tanks and Plumbing-All new.This was discussed earlier in this post.
Cabinets-These can be modified to work.
Hatches and Vents-These can usually be reused as is.
Swim Platforms and Ladders-Modified they can work.New they are outrageously priced.
Air condition unit(s)-These can be reused without much change.Good insulation can help keep the cool in.
Heaters-These can be reused without much change.


There is other items that can be reused but this is the most common expensive items.Anything that isnt used can fetch good money on Ebay or Craigs list.

RVs,motor homes,travel trailers can provide some good stuff also.I wouldnt use parts from them on a full time cruiser.A weekend cruiser should be fine.However,nothing will be USCG or AYBC approved.

Boat Systems Handbook

Read More..

TrawlerFest Bay Bridge 2015

Once again I will be part of THE BOAT BUYERS SURVIVAL GUIDE at Trawler Fest-Bay Bridge. I really enjoyed  participating in the one at Trawler Fest Anacortes. I will also be teaming up with Yacht Designer Chuck Neville on the session: AN INTRODUCTION TO METAL BOATS

http://www.passagemaker.com/events/trawlerfest-baltimore-2015/

Read More..

August 10 to 19 Cleaning Dining Paddling Planning and Oh Yes Sailing Too

Not all sailing in this period.
One day was devoted to cleanup after the cruise, replacement of the last cherrywood batten to hold up the cabin liner after installation of the new screens in the salon (Thanks, Tony!) and topping up coolant in the engine.
One day we had a lovely dinner with Craig and Katherine of Sangaris at the Club. I accepted their invitation to crew for them on their passage back to Boca Raton, Florida this fall. I expect this will be about three to five days, to the Chesapeake. The start date is not yet set, but probably sometime in October. So the departure may be while Lene is vacationing with our niece, Yael, in Israel, which will require some cat sitting coordination.
Another day we visited Fran, an old friend, in Kent, CT.  I paddled her canoe around her lake; not sailing, but.....
Lene was somewhat reluctant to come with me and Bennett and Harriet for a week on "On Eagles Wings" in the Virgins at the end of next March, but consented. I always tell her the same thing and it usually turns out true: "For a good time, come with me!" And Bennett advised that he would drop off the guests he will have during the first of his two weeks aboard, in Charlotte Amalie Harbor on St. Thomas, rather than on Tortola, sparing us the ferry ride from our flights arrival on St. Thomas, USVI to Tortola, BVI. And more important to me, he has agreed to look into going back by boat from St, Thomas, USVI to Tortola, BVI via St. Croix, USVI. This simplifies our Customs process because we will already be in the USVIs. But the major benefits of the proposed route are first, that it provides for two somewhat longer than usual passages (40 to 50 miles) to and from St. Croix  and second, it will add a "new" island to my travels. The beauty of this route is that the passages have a lot of south and north in them, providing for beamy reaches in the prevailing trade winds from the east. I immediately got out my Puerto Rico and VI chart kit and plotted the courses and their lengths and did some preliminary scouting about the entrances to the harbors, anchorages, restaurants, and shore attractions on St. Croix. I enjoyed this very much and sent off an email to my companions with the fruits of my labor of love.
Also, I have blocked out a date in May 2016 for a lunch with Eve, who with her late husband, Selwyn, have mentored me in sailing. [The word "mentor" derives from a sea story; Mentor was a character in Homers Ulysses, who mentored Ulysses son during his long sea travels.] Eve now lives in Austin TX but is visiting New York and we will pick her up and drive her to lunch with Jim, who has sold his beloved "Aria." So, some bits of advance planning. "Failure to plan is planning to fail."
And I did enjoy three day sails, for a total of 10.25 hours. The first was with Lene and our artsy, facially hirsute friend Jeff, who took this self portrait: his reflection on one of ILENEs shiny dorades.

Wind varied from 5 to 15 knots. We headed up through Hart Island Sound, circumnavigated Execution Rocks counterclockwise, getting around green can 1 off New Rochelle, thence a rather straight shot back through the small passage off Kings Point to Throggs Neck and back to the mooring. A rain cloud to the west looked threatening but passed south of us.

Dinner at the Club was again excellent.

Next came a sail with Lene and our nephew, Mendy, visiting from Israel. Mendy has sailed with us several times including Maine and on Club cruises over the years, and he is stronger than an ox due to excessive workouts in the gym. He did all the pulling and winching. All I need do is train him a little better on which strings to pull, how far to trim them  and why to do so, and he will be an excellent sailor. But for the first two hours the wind was so light that we only made about two knots, though the wind came up at last and we got to 6.5 knots for the return. In hindsight, if we had left two hours later we would have had more fun.
The third sail was an Old Salts Wednesday and provided the best wind of the three. ILENE had a bye day. I sailed with Bennett, Brian, Mike, Morty and Clara on Ohana. Wind was at about 12 knots from the NE and we darted back and forth several times between Throggs Neck and the entrance to Manhassett Bay on near beam reaches, achieving a speed of up to 7.5 knots.

Here is Ohana taken from Deuce of Hearts, sailed by Mark, Richie, Mark and Marsha and Art and Carolyn, who sailed on Deuce of Hearts, we had twelve sailors in the cats roomy cockpit for the after-sail libation. Sunny warm and windy; what more can one ask for!

Read More..

January 3 9 SEVEN Lay days in Miami B each Zero Miles

Miami, including the separately incorporated city of Miami Beach, is the largest city on our trip, by far. It is very much like New York, except for the temperature. Chock a block high rises, crowded urban density, traffic and parking problems, construction blocking streets frequently, lots of high income and low income people, lots of culture and a heavy Hispanic and Jewish component of the population. And while there are lots of old folks like us
down here, there are also a lot of young people in Miami Beach. Possibly the similarities are because so many retired New Yorkers have moved here -- also a lot of Canadians.
What made our stay so special -- and so long -- was the hospitality of our friends, Jerry and Louise. We swam in the surf and the pool of their condo. Those are kite board sails not gargantuan seagulls

We did our laundry there, took several showers and were ferried everywhere by auto. We had one dinner at their home, one with them and their friends, Harvey and Phyllis, at a new eclectic restaurant on Indian Creek Road at 27th Street.

From the left: Harvey, Phyllis, Jerry, Lene and Louise

and were invited with them to a lovely party of about forty people in another apartment in their building. We also had pizza with them one night and burgers at the highly rated B&B restaurant near us, which took two hours! So thge place is not highly rated by us.
They introduced us to stand up paddleboarding (SUP), which Lene frequently malaprops as "waterboarding;" Vive le difference! This was at Oleta State Park, several miles north of the city. Lene proved adept at this new (for us) sport. Im a slower learner. I had no problem climbing up onto the board, raising myself to my hands and knees and then to an erect position. But each of the ten times I did this, after a few strokes with the long paddle, I tilted it and fell off. Next time, Im told, I should keep my feet closer to the center of the board rather than toward its sides. And there will be a next time because we have rented an inflatable board (lashed to the starboard rails) and paddle until we get back here in about six weeks on the way home. Pictures of it, on board ILENE and in use, will be shown in next post. Jerry and Louise are also avid cyclists and Jerry is to lead his bike club on a 26 mile bike tour from Coconut Grove soon. One afternoon I rode shotgun with him in their car, calling out the 45 turns to be made during this bike trip.
Our anchorage was very close, walking distance, to many of the attractions of the downtown area in addition to both Publix and Fresh Market, a gas station, Chase Bank, dry cleaners and many restaurants.  The sights we visited were the dramatic Holocaust Memorial

and the Miami Beach Botanical Garden











 (very small but well done with about fifteen stops where you hear a recorded explanation about the fauna at that location on your cell phone).

Lene with giant banyon

We also saw The New World Symphonys hall, where they show movies for free on the huge white wall to people like us who sat on the lawn in front with a terrific audio system, and Lincoln Road Mall, a street closed to vehicular traffic and filled with shops and restaurants. We had lunh at Yuca, (Young Urban Cuban America). We are urban and American so meet only half the requirements, but they let us in and the food was good, including. for me, a  Media Noche sandwich which though called "midnight" they served for lunch.
The movie, shown for free en plein air on the large exterior wall, was "Hole In The Head", a Frank Sinatra comedy of the late 50s, which seemed uniquely appropriate to the setting because Frank played a down and out widowed playboy hotel owner in Miami Beach with a young son. The titles were aerial shots of the beach with banners towed by those beach banner planes spelling out such things as "Directed by FRANK CAPRA." It was not a great movie, saved by the performances of Edward G. Robinson and Thelma Ritter, but the experience was terrific.
At the near end of Lincoln Road, which is only about five blocks long, is a eighteen screen movie house in which we saw Unbroken, Top Five and Selma; a movie binge after a long drought along the way.
Boat chores accomplished during our stay here included sewing the sides of the zipper at the top of the stack pack to the sides of the bag. The stitches got torn out when I forget to fully open the zipper and raised the main with the electric winch; it is so strong that the sails leach pulled the stitches out, which is not god for the sail either!
I also had to take out the interior panels of the big lazarete to locate and fix the fresh water plumbing which is hidden behind the largest and lowest such panel. We noticed that the fresh water pump did not shut off after the faucet was shut off (because, due to the leak, pressure never built up) and Lene heard a flow of water after we turned that pump off. Yes, one of the short pieces of hose that I had attached last winter had come off, so the pump was pumping our fresh water into the bilge. I added a second hose clamp to each end of that two inch long piece of rubber hose and put back all the wood panels with the eighteen screws.
While the title of this post says we traversed zero miles, we actually did motor about 2.5 miles, from one side of Belle Island to the other.

First we went west along the north side of the the Venetian Causeway (the road connecting the row of six man made islands across the center of the chart) to its low opening bridge, at its Miami (left side) end, and then back east along the causeways southern side to the Miami Beach end (right side). We started a bit northeast of Belle Island, the easternmost of the string of man made islands that the causeway connects, to end up just south of Belle Island, just .4 miles away. We passed the Flagler monument, on the tiny island to the northwest of the blue (shallow spot in the middle of the right side of the chart.

Before the move we were about 100 yards west of the police dinghy dock (just below the small rectangle in the upper right) and afterwards we were almost half a mile south west. The reason for this change of venue was the weather.  The original anchorage was crowded making it difficult to put out enough chain to feel secure without bumping into nearby boats when swinging on the anchors. And with predicted winds gusting to 30 knots from the north, this problem would have gotten worse. On the south side, there is a lot more room between the boats and we were in the lee of the island which protected us from the strong winds.
Next stop: Dinner Key, known as Coconut Grove to land people, less than ten miles away.

Read More..

Header Photo Australian Vee Jay Dinghy

The previous header photo was of the Australian junior class, the Vaucluse Junior, aka the Vee Jay, or simply the "VJ". A 12-foot dinghy, the Vee Jay was originally designed in 1931 by Sydney boatwright Charles Sparrow to a design brief for a junior sailboat given to him by local sporting-goods store owner, Sil Rohu. It was a simple low-angle V-shaped hull, plank and frame construction, readily built by amateurs. The pre-World War II hulls had a small cockpit, similar to the North American Sunfish class.

What makes the class stand out was its transformation after World War II. The adoption of plywood in the late 1940s considerably lightened the hull and sailors started adding planks; the first plank (sliding seat to North Americans) added in the late 1940s but not coming into common usage until the 1950s. The second plank was added by the West Australians in 1958. The small cockpit disappeared, replaced by a self-draining surfboard deck. Combined with a small flat kite (shike), this junior dinghy had enormous power and speed in a breeze - unlike any junior trainer, before or since. (Historian Chris Thompson points out this Australian penchant, after World War II, to incorporate performance upgrades, even to supposed one-designs, even when all the previous models became immediately obsolete, was one of the main drivers in the evolution of Australian lightweight high-performance dinghies.)

The class collapsed in the 1980s under the hegemony and homogenization of fiberglass junior trainers (namely the 420).

I have taken most of my information and photos from the Vee Jay website. For those who wish to read more I would direct them to click on this link to their website. I would also like to thank Aussie, John Fairfax, for also filling in the history and providing photos.

---

Some additional photos.

The first design by Charles Sparrow was named Splinter. Deciding the first hull was too tender, Sparrow drew up a wider modified hull the same year named Chum from which commenced the VJ class. The original boats had a gunter rig.

Two photos of the simpler, 1930s hiking Vee Jay.

The squat sail plan was easily handled by lightweights in the typically strong Australian breezes.

To me, the most iconic photo of the Vee Jay, "Warren Nupier in Impala"

A promotional brochure with the Vee Jay at full crack, under kite.

This photo shows the final development of the Vee Jay before the class died out (the boom looks shorter with a straighter leech mainsail). There was a recent movement, documented on the Vee Jay website, of bringing back the class with a more modern sail plan, but that hasnt seemed to gain much traction.

A photo lifted from South Gippsland Y.C. of a restored Vee Jay racing at their 2015 Classic Wooden Dinghy Regatta. This is a one-planker, just for the skipper.

A 1950s video showing two juniors rigging, launching, and sailing their Vee Jay.

---

Ed. Sea Story

"As a young sailor, during the 1970s, I came across a Vee Jay on Annapolis Harbor. I saw this strange craft buzzing about the Harbor, two sliding seats, as we sailed our International 14 out to the starting area. On our way back after the racing, we encountered the same double sliding seat dinghy and sailors again. this time entwined in the fishing lines of two irate fishing boats, the air turning blue as the skipper was working desperately under his rudder. Inquiries on shore had the sailor as someone from the Australian embassy. I never saw him again; most likely the encounter with the fishing boats left a bad taste in his mouth.

---

And another sea story Ive pulled from the comments... from Northwest sailor Mike S.

"When I moved to Oz in 1965 with wife and daughter in tow, aged 21, I couldnt afford a boat, but someone was selling an old VJ with cotton sails and twin planks for only 10 quid, so I couldnt resist. It was a hoot albeit pretty rough around the edges, and as I didnt have a crew I jury rigged a trapeze (stitched my own canvas harness!) and sailed it singlehanded from the trap. Great fun on Lake Illawarra with steady 15-25 knot breezes every day. Its demise happened during a race, I got a crew and we sailed with the planks, some time during the race the wind piped up, and the old plywood started to open up, with us slowly sinking. We abandoned the boat, climbed aboard the rescue boat and left it to float to the shore. I went the next day and brought it up, but it was too far gone.....Had a metal daggerboard as I recall....

---

Click here for the post about the other Australian pre-WWII class, the Len Morris scow Moth.

Read More..