The previous header photo was of the Norfolk Punt, a racing dinghy class found on the Norfolk Broads, England and derived from the bird gunning punts that were in use there in the late 1890s, early 1900s. The Norfolk Punts are 22 long, double-ended and like the International Canoe, the modern boats have no resemblance to their heritage except for the canoe stern. The Norfolk Punts of today are very much a modern racing dinghy with double trapezes, assymetrics, and a tall, overpowering sailplan. Although the modern class is a development class there does seem to be a good mix of vintage punts racing though I have no idea how they handicap Punts with hulls from 1935 versus a punt designed in the last ten years. The Punt featured in the header photo looks like a 1960s Wyche and Coppock single chine design.
The photo of the Norfolk Punt below gives a good idea of what the original sailing Punt looked like; reverse sheer, decks sloping outward, high coamings. With this Punt you can see the gunning punt lineage. This Punt looks short so it may be a reproduction.
Here is a modernized 1930s Punt hull with carbon rig and trapeze. It retains the reverse sheer and high coamings.
A video of a modern double trapeze Punt with the video also ending with a modern double trapeze teabag capsize.
As mentioned in my post on the Lark Scow - The Laser of the 1900s, Thomas Day of The Rudder magazine encouraged the home-builders of the Lark to be inventive; there was no strong concept of one-design strictness at this genesis of small sailboat development. So builders strayed from the plans, building Larks with yachty looking counter sterns, with cuddy cabins, longer and shorter Larks and they gleefully sent reports of their modifications into The Rudder and Thomas Day published them.
In 1903, in The Netherlands, W. Beekhuis, owner of the boat building yard "Navis" te Loosdrecht, built a small Lark, only 3.6 meters long (11.8 feet). He built them from the time period 1903-1905 but it is unclear how many he actually produced.
The 1903 Beekhuis Mini-Lark
In 1919, A Van Gool, from the northern coastal district of Friesland, The Netherlands, built a Beekhuis type Lark with additional modifications. Having traveled to America and observed American sailboats, Van Gool borrowed the Star type keel and grafted it on the Beekhuis Lark scow hull. He made the hull longer, 4 meters (13.1 feet). He replaced the squat gaff rig with a taller gunter rig. This Larken Klasse would become very popular in Friesland and Twente during the 1920s and 1930s.
The Van Gool/Friesland Larken
In 1934, Romke Vries designed an even higher aspect, full battened gunter rig for the Larken Klasse. By the end of the 1930s the more modern O-Jolle singlehander centerboarder was cutting into the Larken Klasse numbers and, as the Finn dinghy and OK dinghy were introduced after World War II, the class continued to lose popularity. In 1965, the class made its last appearance at Sneekweek, seemingly destined to fade into obscurity.
That is until 2004 where a group of Larken Klasse enthusiasts banded together to start restoring the old Larkens and build new ones. In the short span of 11 years they have built the class up to where they are now getting a vibrant 20+ turnout at the major regattas. An amazing resurrection of a true classic!
The newer Larkens have adopted a more modern keel with a separate rudder. The lead ballast is 34 kg.
The present day Larken Klasse on a reach (Anyone know who the photographer is?)
A vintage photo of a happy Larken skipper.
At this years Sneekweek regatta, artist and small boat racing enthusiast, Jan Tekstra decided to jump into a different class each day and record his race on a GoPro. This is his Larken segment.
Acknowledgement: All of the history of the Larken Klasse was taken from this article by J.K Kuipers As I was tossing this post around my brain, the German Segel Reporter beat me to it by about two weeks and brought out Michael Kunsts post on the Larken Klasse.
To plan arrival times from overnights so as to coordinate with tides, marinas being open and daylight, one has to assume a speed. Divide the distance in nautical miles by speed in knots and you get hours. Several questions in the Coast Guard Captains licence exam involve this fact and an assumed constant speed, which power boaters can more or less maintain. For overnight passages, we assume ILENE will make an average speed of 6.5 knots. We left at 9:30 am with a plan to arrive in mid morning the next day.
But sailboats have only moderate control over their speed, which is largely wind dependent. And it takes a minute or two of going the wrong way while putting up and lowering the mainsail, and relatively slower motoring speeds for the miles of the going out at the beginning and coming in at the end. And our course was lengthened when, due to the wind being directly behind us too slow, we took a wider turn around Frying Pan Shoals to avoid a dead run. That shoal extends quite a few miles out from the north side of the mouth of the Cape Fear River. Conversely, our course was shortened slightly when we cut the last buoy, R2, and passed near Rattlesnake Shoals off the entrance to Charleston. (That shoal is 16 feet below the surface so we could go directly over it, but why take even theoretical chances.) But the greatest variable is the wind. We had a few hours where the wind gave us less than four knots, and two hours in which we made a thrilling 8.5.
We had about three hours of very light rain in the late afternoon. One cant get rainbows without rain.
Some dolphins played with us at dusk. Our dinner was a delicious and filling hot bowl of peppers, onions, sausages, pasta, red sauce and cheese that Lene had partially cooked before we left; we ate in the cockpit in the dark. Lene maintained the watch from 7 to midnight and I came on for the rest of the trip. It got cold during the wee hours but full foulies and gloves kept the chill out -- no pain. When Lene took over we were going only 3.5 knots on a very broad reach so I authorized the engine at 5 knots and we hauled the mainsail to midships to be a stabilizer. This was a mistake, in the sense that we wasted fuel and engine hours: sometime during Lenes watch the wind came back, and just aft of the starboard beam. So at midnight I eased the mainsheet out and we jumped to six knots. I shut down the engine and let out the genoa to play as well and our speed built to seven and eventually to variations over nine for several consecutive minutes. Eventually, we furled the genoa for the last three hours to delay our arrival. We had a beautiful sunset,
but the sunrise took place "off camera" because heavy dark clouds blocked the eastern horizon during that event. The night time watches were quite boring due to the absence of even a single other boat out there to be seen, much less to worry about; we really had the ocean to ourselves.
The high speed portion was thrilling. ILENE seemed to be saying "I was born to go fast and Im having fun out here!" Comparatively little heeling, and not big waves, just an exuberant dash through the open seas, out of sight of land with enough light, after the moon came up, to be able to see a bit. "Thanks, Dad", she seemed to be telling me.
In my last post I worried about the auto pilot but it performed very well during this passage. We expect minor variations in our heading among strong forces out there and auto steered admirably, though noisily, with a soft squeaking/beeping sound that I need to investigate.
This bridge is just a bit upstream from us.
Im getting the spring lines in place for our arrival; end of the bridge, right.
Bottom line: we arrived in the Charleston Maritime Center at 10:30 am, 25.5 hours after we left, with an "average" speed of 6.35 knots over the assumed 162 nm.
One difference as I have aged is I dont mind cutting holes in my boat. I wouldnt have even contemplated such an undertaking as a youngn.
Last fall I was trying to figure out why I had paint cracking on the aft deck of my Maser. The aft deck seemed very soft. Three mm. plywood is flexible but this seemed worse than usual. The only way I was going to find out was to cut two holes in the aft deck. It turned out that there was a mini-frame, about 50 mm. deep, of 3 mm. plywood, set aft about 300 mm. from the main aft bulkhead. It had cracked on both sides about 150 mm. in from gunwhales, probably when I had moved aft on that area on a heavy-air reach.
To make the frame whole again, I sistered the frame at both the cracks.
The following photos show the process of working backwards to get a watertight aft deck once the repairs had been made.
Backing pieces glued on. Plywood top piece cut to fit. I used a top piece of pine as a gluer for the plywood top piece on the aft side. This also gave some added I-beam strength above the mini-frame. (I cut the hole right next to the mini-frame repair and didnt have room for an aft backer strip.)
Close up of the open hole with backers in place.
Both plywood pieces in place, glued up. Top aft I-beam pine piece glued down.
Repairs glassed over with 9 oz biaxial cloth.
I was eventually able to get some primer down and that is how she looks at the present time. Good enough for a Tweezerman repair.
I was frankly surprised to see this small dinghy cruiser at the Sailboat Show. This 12 (3.6 m) mini-dinghy cruiser designed by John Welsford has become the darling of home-builders looking for a small outside, but big inside, simple rig, able-sailing project. This community of boat builders, an alternative universe in the sailing world, revolve around the DIY wood designs of Phil Bolger, Jim Michalak, Ian Oughtred, John Welsford, Francois Vivier and others, And this alternative universe seldom intrudes on the plastic commercial world which predominates at the large boat shows. But, in 2015, there she was, a plastic Scamp, built by Gig Harbor Boatworks north of Seattle Washington.
There is no doubt this is a clever design. It has a transom bow that tapers rapidly toward the waterline, the actual sections at the bow waterline are V-ish. There is an offset centerboard under the starboard seat. This makes for an unobstructed floor, perfect to lay out a sleeping bag. The Scamp is high sided though the designer has given her a pleasant sheer to make this a jaunty looking dinghy. There is 70 kg of water ballast to dampen down what could be a very lively motion in wind and waves.
The summer of 2014, I was sitting on the back lawn at my friend Bill Ms house, just off South River, when I spotted a small sailing dinghy making her way smartly against a building sea breeze. To settle our speculation about what kind of boat we were watching, Bill promptly went to get his binoculars. Through the binoculars I could tell it was a Scamp (a very distinctive profile with her balanced lug rig) and the skipper was doing a fine job getting her upwind. He poked his nose just into the Chesapeake Bay and then turned downwind to rock and roll back into South River. As a spectator, I was mightily impressed at the Scamps sailing performance (initially being somewhat of a skeptic when the Scamp first came out). One quibble was the Scamp looked somewhat tender going offwind, rolling back and forth - not atypical for a cat-rigged boat, or maybe the skipper had dumped the water ballast for a quicker ride back home.
Two photos of the Gig Harbor Boatworks Scamp from the Annapolis Sailboat Show. Plenty of room in this 12-footer! If I remember correctly the rep said they were building about 30 a year. Base price is $13,000 USD.
The cabin is just a cuddy cabin, enough to shelter from the weather. Plenty of storage under the seats and up forward.
Wooden Scamps being built from CNC kits. This photo gives a good idea of how the kit pieces fit together. You can see in the lower Scamp the centerboard trunk incorporated into the starboard seat tank.
A Gig Harbor Boats promotional video.
Also, over on my blog list is this duo building a 17 Devlin designed daysailor-cruiser.
The previous header photo featured a French Classic Moth Mariposa (Spanish for butterfly) sailing in tandem with a Nantais Vintage Moth (blue sail) at the French annual Classic Moth rally and regatta which was held yearly during the early 2000s. The strong sheer gives Mariposa a traditional look which suggests a traditional round bottom shape.
Nope. The header photo above is an optical illusion as other photos reveal that Mariposa is actually a multi-chine plywood shape (a three-planker) with the bow sections developed and pulled up.
Mariposa has a flat rocker panel that starts just in front of the daggerboard case and a topside chine that curves up to meet the gunwhale about 600mm from the bow. The developed bow suggests this Moth was built using the stitch and glue method.
The French Classic Mothists weigh their Moths like the Americans - on a bathroom scale. The scratched up bottom shows that Mariposa is not a coddled racing dinghy - and gets plenty of use.
An in-the-water shot of Mariposa shows the topside chine clearly disappearing into the gunwhale. This Moth design is visually appealing - Mariposa may not be much of a racer but thats OK.
The designer is the tall gentleman on the left. I have no idea who he is. Maybe some reader could help out on identification?
Update, August 14: Dominique Banse to the rescue with the designer indentification. Thanks Dominique!
"There is an article about this Moth in the French magazine Chasse-Marée number 147 from November 2001. The owner builders name is Bertrand Warion. The boat is built with 5mm plywood and weights 76 kg."
Update September 29, 2015: Designer Bertrand Warion adds a comment to this post updating us on the latest with Mariposa.
"Hello ,I am Bertrand Warion who designed Mariposa and usual reader of your blog.
The boat is still in good condition with great modifications, large cuts to flatten the bottom rocker and new cockpit plan, more "modern" but quite unconfortable for me. [I am] thinking to ameliorate that point.
I did not sail Mariposa [for] 5 years (leaving job, town) and [now] mainly designing and building others boats but i will recondition the boat soon.
Here are some new Mariposa pics.
There are a few enterprising readers of this post who could put together their own version of Mariposa, at least in model form. Earwigoagin is always open to publicizing such design experimentation.
Through the early 2000s the French Classic Mothists held an annual get together. I think it was originally held at one of the clubs on the Seine but then moved over to a small lake about 100 km. south of Paris, sponsored by Cercle de la Voile du Centre, Etang du Puits, (Google translation - the pond of the well), just off the Route dArgent. Though well attended, in a mystery still not explained, the annual French Classic Moth gathering and regatta just stopped. [Mystery somewhat explained - see below] .
The mystery of the French Classic Moth get-together got somewhat clearer when reader Dominique Banse emailed an article from a 2001 issue of Chasse-Marée, the French classic/traditional boating magazine. It turns out that all these photos were taken at a Classic Moth design competition that was sponsored by Chasse-Marée and held at Suc dErdre, just north of Nantes (and not at Etang du Puits as I wrote initially). There was a turn out of 20 Moths Classique, both new designs and old, as well as several IMCA narrow skiffs. There is still no explanation why the Classic Moths in France could not keep the annual event going after 2001.
I recently rediscovered on the Web, photos from Marc Morell (who took all the photos used in this post) documenting the Suc dErdre. The diversity of French Classic Moths is just astounding! Ill feed more of these photos into later posts on Earwigoagin.
In the battle in the sailing marketplace to be the next "modern" singlehanded racing dinghy there is, besides the RS Aero, the Devoti D-Zero, designed by Brit Dan Holman. Visually the D-Zero looks more "swoopier" than the Aero and the snout, the area in front of the mast, looks more pronounced. The D-Zero is not as super-light as the RS Aero (but at 42kg still very light).
There is the rumor on the InterWebs that Melges also has a 14-foot singlehander in pre-production testing. This will add an interesting third new singlehander to the mix; a development bemoaned by some as cluttering up consumer choice and prohibiting one class from gaining traction. However, it is not a bad move by Melges, given the odd tendency of Americans not to buy sailboats that were foreign designed or built (or if they were foreign designed we need to re-work them such as the Collegiate 420 or Collegiate FJ).
Back in Mark 2014, I did a post of the unveiling of the RS Aero and Devotti D-Zero at the London Dinghy Exhibition.
As promised, a send-them reaching video of the Devotti D-Zero.