HYC Cruise Day 9 Sunday August 2 Stonington CT to Westbrook CT 29 Miles

ILENE got underway at about 9 am, half an hour before Ohana was arriving back at City Island. After a few hours of sailing, it was motor sailing the rest of the way for Ohana.  The wind was too light for ILENE to sail as well, and what apparent wind there was came directly in our faces. So ILENEs main was up but just to prevent rocking.
We passed a green 30 foot sloop with sails up, headed east, going nowhere, with Towboat US and the Stonington Police at her side. Later we heard that the owner had reported a slow leak and the Coast Guard demanded slow speeds from passing boats and discussed with TowboatUS that they were having trouble finding a facility willing to take responsibility for the boat.
The tide was very strong and favorable for the best part of the trip and ILENE got into the Brewers dock in Brewers Pilot Point Marina at Westbrook at 1:15.
The only other Harlem boats here are Blast and North Star, which both passed us. Not a good photo, sorry,  but they were going too fast for my camera to warm up!
I have learned that North Star is a "Rhode Island Lobster Boat", not that any lobster boat has ever had such elegance, but she is based on the lines of such a working boat.
 We all said goodbye to Marty and Ghennie who have departed for home from Blast, picked up by daughter Darrah with two of the grandkids.
This Brewers marina is pricey, $4 per foot, but friendly and efficient with lots of extra services such as free wifi, free electricity, a nice pool, courtesy car rides and free propane for the community barbecue grills.
I got a ride  to West Marine to get a replacement halyard for ILENEs burgee while Lene shopped for provisions.
I then tested out the pool. Dinner involved shared foods grilled on the barbi.

Camille, Dianne, Bruce, Lene, Ernie and your Fleet Captain, as photographer; we are down to six but reinforcements are on the way!
Read More..

Building the Optimist Strongback

The least complicated part of boat building is the strongback or base with which to attach the stations or molds. Clark Mills designed the Optimist with only three simple molds - bow, mid-frame, and transom. This strongback gives the builder a good base to attach the three cross-members that will set the precise distances for the bow, mid-frame and transom.


We are building three Optimist at once, so here is a quick look at our three strongbacks using the CABBS plans:

Read More..

Feb 7 Fast Ferry To The Dry Tortugas Zero miles on ILENE

The fast ferry, seen here at the destination, took us (and up to 198 other folks) the 61.9 nautical miles to this national park at an average speed of almost 25 knots. The passage outbound, starting with check in at 7:15 a.m. was pleasant, with a NE wind and waves on our starboard quarter. Approachiong the island requires a 360 degree circling of the island, counter clockwise. (You can see most of the cruising boats that came here on their own behind the ferry.) There is a faster way to get here than the ferry though:
We met a lovely couple, Suri and Carlos, from Miami They are power boaters and fishermen. They escaped Cuba (before they met) by getting  passes to visit Spain and then obtaining sponsorship into the US from relatives. My father did this in the 1930s, escaping from Hitlers Germany first to France and then obtaining sponsorship into the USA.

The ferry served a big wholesome (not gourmet) buffet breakfast on the way out and a lunch at mid-day, included in the price with coffee and water all day, use of the snorkel equipment, admission to the National Park and guided tours, all for $155 per person. Snorkeling was one of the featured activities and I dressed accordingly, but we did not enter the water for two reasons: (1) too much other stuff to do, such as Ranger Ricks  (his real name) informative talk, and
(2) the wind whipped up waves and created a wind chill.





These pilings which supported a former coal dock were the suggested snorkel place, but not with waves knocking you about.

The ride home was wild, going so fast over the now larger waves on our port bow. Many people got seasick because the huge ferry was leaping and lurching. We returned to shore at 5:15 after a rather full day.

Fort Jefferson fell victim to advances in naval weaponry, particularly rifled cannon, which permitted bigger shells to be thrown further, sort of like when a football pass is thrown with a good spiral.

Dr. Samuel Mudd set the leg of the assassin of President Lincoln. He was convicted of participating in the conspiracy and sentenced to life on this dreary hot dry fortified sandbar.
His sentence was later commuted by President Andrew Johnson in response to a petition by the soldiers, jailers and prisoners here after he saved lives during a yellow fever epidemic.

Fort Jefferson is claimed to be the largest masonry structure in the western hemisphere, made of sixteen million bricks: "the Gibraltar of the Gulf."
You can get a sense of its size by looking at the people in front. Its six sides with salients on each corner and its surrounding moat covers most of its sandbar, Garden Key. You would not want to climb the outer seawall, swim across the moat and attack to fort while being gunned down by grape shot from the salients at each end of the side.















Salient with the light house and a 15 inch diameter cannon atop:







Actually there is a taller lighthouse 2.5 miles even further west, on Loggerhead key, seen dead center on the horizon, if you look closely.
Fort Jefferson was built and fortified for a negative reason: to prevent other nations from taking the place if it had not been strongly defended. It was strategically desirable because it commands a position at the far western end of the Keys around which shipping between the Gulf and the Atlantic has to pass and because a little known spot deep enough for anchoring battleships lies three miles north. Not a single shot was ever fired in war from Fort Jefferson.
Dry Tortugas National Park is also a bird sanctuary.

We saw huge frigate birds floating almost satationary on the updrafts that the forts three story walls create. Next are the first thousand of the 50,000 sootie terns who are coming here from western Africa for the mating season and screeching above the formerly separate and adjacent -- and now recently connected -- Bush Key.
Im hoping to replace my bird photographs with ones taken by an expert professional photographer with his strong telescopic lens, Richard King, of  richardkingphoto.com.


A fun full day. Lene was right; better by ferry.

Read More..

November 18 19 Beaufort to Harbor Town on Hilton Head and Lay Day There 23 2 NM

I had planned to leave Beaufort at 2 p.m. on the 18th and arrive in an anchorage off Cumberland Island in the St. Marys, Florida area about 10 a.m. on the 19th. But the Admiral was wiser in light of predicted 29 degree temperature at night, so we made the short hop in the ICW to Hilton Head and put in to its Harbor Town Yacht Basin, in the Sea Pines Resort, where in addition to golf and a health club, they have heat.

My brother, who lives in the Atlanta area, brings his family here every year and it would have been great to see him here but it is a long drive, he comes in the summer and this is definitely not summer. The developers did a good job of saving the majestic old trees bearded with moss. Most of the housing is vacant for the off season now; this place must be a big traffic jam in season.

The trip was cold but uneventful. I had on many layers to keep warm, topped off by heavy weight foulies which keep out the wind and keep in the body warmth. We saw porpoises, but that is an everyday occurrence hereabouts. Later I learned the cause of the unusual, to me, activity of the porpoises in Big Tom Creek. They hunt for food in packs, herd the little fish together and than eat away. We were passed by this shrimper with his nets out to starboard.
I wonder how he can go straight with that much drag so far to starboard.  We passed Parris Island, the famous Marine base.We used the small jib to ease the engine except when transiting Port Royal Sound, where the wind was on our nose. It was a four hour trip with Lene in the cockpit with me after it warmed up a bit, for the second half.

The marina is a circular affair carved out of the land with an unofficial tourist lighthouse at its side. Four dollars to climb to its top.









Next, the other ILENE is in the center, from the top.
On the lay day I visited the health club, 0.9 miles walk from the marina, for my first workout since early October. I may have done a bit too much but the muscles will work in out through sailing. And I cleaned and waxed the port side rubrail, because we are port side to the dock here.
They have good restaurants here. We dined aboard our first night and at the Topside Restaurant in the marina, (Extraneous lights at top are reflections of the restaurants internal lights on their window -- you can see how calm it has become.)
We were joined by Joe and his wife Sol, from "Solshine" their 42 foot Catamaran (25 feet wide) tied up near us, after sharing a bottle of wine aboard the cat. There we met their dog and cat, but I forgot to take their photos; so next time. They are retired from teaching school and computers and recently sold their land base in suburban Virginia so Solshine is their only home.
I had met them in the laundry room at Beaufort, and now here. Their son is in medical school.

Our current plan is to leave mid day tomorrow and get to St. Marys early the next day. So the jack lines, and preventers must be rigged in the morning and the harnesses and tethers gotten out, despite winds predicted to be so light that they will force this to be a motoring passage. But warm.
Read More..

HYC Cruise Days 14 15 August 7 and 8 Port Jeff LI to Centerport LI and Lay Day There 18 1 Miles

ILENE hauled anchor at 10:45 and was passed by North Star only about two miles outside PJ inlet. Waves from aft gave North Star a roly ride. The wind was broad on ILENEs starboard quarter and while only about 10 knots true, was strong enough to push us on a course close to the entrance to Huntington Bay. There we jibed and continued sailing until the narrow, well marked entrance to Northport Bay. Another good sailing day with enough time to go slow. We were on our mooring at three.

We saw North Star, a few moorings away and chatted a while in the Centerport YC bar with PC Bruce and Dianne, before taking the launch to town to explore. Another postcard run.


The Centerport YC is on a peninsula projecting northward into Northport Bay. Centerport Harbor is on the west side and Northport Harbor is on the east side of the peninsula, but both Northport and Centerport YCs are in Northport Harbor, which is nicely protected by high hills on with sides. There is a channel between them, visible in this picture taken from Seymours Dock.


We learned that Dana and Ellen of Frabjous were on a mooring here. But it was an evening when everyone did their own thing, with the big dinner celebration the next night. Unfortunately, Frabjous had to go to Seacliff YC on the 8th, so we did not have the opportunity to break bread with them. The waters surface was still as a morgue and the heat of the day switched into a light blanket night.

On the lay day our group was enlarged by the arrival of No News with Ken and Camille, last seen several days ago. 



"Sangaris" arrived with PC Craig and Katherine and PC Erwin as well as their friend Bill, who had made great time up from South Florida in the past three weeks. Also in our party at dinner were Doug and Hedy of "Hurley" and Walt and Rita of "Into The Mystic". These Harlemites joined us by land, not by sea. We all enjoyed the company of each other in the dining room of the elegant Centerport YC, which provides excellent service.





 They printed up a special menu for us. 


But I have to tell ya, the food is better at the Harlem.


 
Walter, Rita, Diane, Bruce, Doug, Hedy, Ken and Camille.


PC Erwin, PC Craig, Katherine, Bill and Lene.
We also met two other former Harlemites who were at the club on their boats: Rick, who has joined the Norwalk YC after moving "Messing About" to Connecticut, and Bruce and Linda of "J-Erica" with the Huguenot YC.

Another blissfully peaceful night to sleep aboard.
Read More..

Fitting Out A Newly Built Boat

Fitting out a new boat can be difficult and very very expensive.I have known people to buy $20,000 boats and then drop another $50,000 to $60,000 on refits before they even touch water.Well my boat will cost around $3500 for the completed bare hull and cabin. See my post "Spira International 27 Foot Boat Plans Build Costs".Im looking at another $2,000 for paint,finish,and interior,and roughly $2,000 for powering the boat.So what about electronics.This is a difficult one to put a price on.The one system that you want to be all new is the waste,water, and plumbing system.This could give you tainted water,flood your boat, and/or make it stink like a sewer,if old equipment is used.Pumps maybe ok with a good cleaning,but tanks and piping need to be all new.

Understanding Boat Plumbing and Water Systems

First,how will the boat be used?For the first two or three years,the boat will be trailered to lakes and coastal areas.Eventually,it will be used to do "The Great Loop Cruise". Knowing how I will use the boat and when I may need to make upgrades helps a lot.I can resell my old equipment, when I upgrade, to recoup some cost.To do this, I will have to buy decent quality reliable products and maintain them in as new condition as possible.Ive rarely ever had problems taking care of things.

 The Great Circle Route

Second thing,the power plant.Jeff Spira,the designer of my boat, recommends an outboard for power.I have some issues that make outboards a bit of a challenge to use as a means of propulsion.My area has a strict ban on two stroke outboards.That leaves me trying to find a four stroke with controls and gauges.Four strokes are a relatively new thing and used set ups are still fetching top dollar.I cant afford to pay around $10,000 for a 90 horsepower four stroke outboard set up.After consulting with Jeff Spira,he has approved the use of a sterndrive.These are plentiful in my area and cheap,relatively speaking.A good complete four cylinder 140 horsepower 3.0L Mercruise set up goes for between $1500 and $3000.

Third thing,I have a plan to cut costs,get most of the stuff I need,and possibly make a little money back.I will buy a donor boat that is complete and running good.I can find sterndrive boats in good operating condition between $1000 and $6000.Some even have twin sterndrives.That would give me a few options.1)Sell the extra sterndrive set up. 2)Keep the extra sterndrive set up as a back up. 3)Clean up both sterndrive set ups,sell them,and buy a completely new set up.My choice would be the 140 horsepower diesel Volvo Penta D3-140 sterndrive set up.These are hard to find on the used market and most are damaged.New they start out around $12,000.A new 3.0L Mercruise sterndrive set up runs $6000 to $8000.On rare occasions,they can be had for around $5000 to $5500,but come with a catch.They must be set up by a factory Mercruise service center.

Stern Drive Manuals

The donor boat.This is tricky depending on location or region.Most boats here are bow riders or water sport boats.All tho,its not unusual to find cuddy or cabin cruisers for really good prices.Beware that a lot of boats are not properly maintained, and thats the reason they are for sell.Of course, one can get lucky at times and buy a boat that barely needs anything to be back on the water.Look for soft spots in the transom and floor.If they are soft then the stringers and flotation foam have been compromised,and the boats structure has been compromised.This is a good negotiating point.It is really expensive and labor intensive prospect to gut a hull for transom and stringer replacement.

What can be used from the donor boat?This depends on what boat is decided on to be the donor.When building a boat you need everything.

Heres what I look for in a donor.
Power Plant-must be running with all controls and gauges.
Electronics-VHF,depth sounder,radar,gps,etc... in operating conditon.
Pumps-Wash down,bilge,fresh water,black water,and grey water.
Electrical-Batteries,inverter,charger,genset,breaker panel,fuse panel,switches.
Windows-I plan to build my own to fit my boats design.
Bimini Top and canvas-It wont fit the boat,but it can be modified and save some money.Resell is an option.
Interior-Its hard to reuse interiors but they can be modified to work.
Thru Hulls-Pure preference,but I want bronze if theyre under water,and stainless steel above water.Plastic ones crack and fail.
Anchor,Rode,Bow Pulpit,and Windlass-These can usually be modified to work.
Heads(Toilet)-These things are a pain,save yourself the headache,buy new.
Sinks,Faucets,Showers-If these are in good condition,I will use them.I prefer stainless steel.
Tanks and Plumbing-All new.This was discussed earlier in this post.
Cabinets-These can be modified to work.
Hatches and Vents-These can usually be reused as is.
Swim Platforms and Ladders-Modified they can work.New they are outrageously priced.
Air condition unit(s)-These can be reused without much change.Good insulation can help keep the cool in.
Heaters-These can be reused without much change.


There is other items that can be reused but this is the most common expensive items.Anything that isnt used can fetch good money on Ebay or Craigs list.

RVs,motor homes,travel trailers can provide some good stuff also.I wouldnt use parts from them on a full time cruiser.A weekend cruiser should be fine.However,nothing will be USCG or AYBC approved.

Boat Systems Handbook

Read More..

TrawlerFest Bay Bridge 2015

Once again I will be part of THE BOAT BUYERS SURVIVAL GUIDE at Trawler Fest-Bay Bridge. I really enjoyed  participating in the one at Trawler Fest Anacortes. I will also be teaming up with Yacht Designer Chuck Neville on the session: AN INTRODUCTION TO METAL BOATS

http://www.passagemaker.com/events/trawlerfest-baltimore-2015/
Read More..