Tampilkan postingan dengan label of. Tampilkan semua postingan
Tampilkan postingan dengan label of. Tampilkan semua postingan

Boatbuilding in a Nation of Two Finger Texters and Page Swipers

One of the memes of modern American culture is we have lost our DIY aptitude (a characteristic particularly attached to the millennial generation). We dont fix our cars, we dont fix our houses, we dont build things..we pay someone else to do it. I was reminded of this when reading the geeky but very informative Professional Boatbuilder magazine (by the same publisher of Woodenboat magazine).. They did an article on Chesapeake Light Craft, the plywood boat-kit builders based here in Annapolis. Chesapeake Light Craft spends an inordinate amount of time trying to make their plans and kits so comprehensive there is very little room for error. I then read the following paragraph and my jaw dropped.
Some customers are so unskilled that it would be better not to sell them a plan or a kit. "So many people these days cant read plans at all. When a part is symmetrical around an axis and the plans only show half a part, some people build half the part. Thats happened twice in the last month. One guy made half of the deck and the bottom. We were very nice. I guess if you cant laugh, you have to cry...You cant make assumptions about anybody."[Professional Boatbuilder, Number 152, pg. 26]

Hmm! maybe we are becoming a nation of hopeless klutzes.

Read More..

Maiden Voyage of Optimist 1

Published on Feb 8, 2014 This is the first of three Optimist dinghies we are making from CABBS (Cleveland Amateur Boatbuilding and Boating Society) plans. The plans have been redrawn from Clark Mills original drawings for the Optimist in 1947. Check out www.woodenoptimist.blogspot.com to see more about building this sailboat
Read More..

July 2 to 13 Six Days of Sailing and First Two Nights Aboard

Yes, twelve fun filled active boating days (and two nights) for Lene and me. Six were sailing days which averaged only about 3.35 hours per day, plus a work day and two overnights. Before that, a fireworks party on the 37th floor of Devs apartment, which was great, including the fact that due to the distance from the event, the fireworks were like children should be: seen but not heard.
The first sail in this period was with two of the men from my Book group, Arthur
and Gary, Arthurs wife, Marie Genevieve (the photographer) and Rafael, their son, on his dads lap. This pic, like many others are taken on the launch because your correspondent is too busy sailing the boat to perform his photographic responsibilities, and because the bimini and dodger do too good a job of providing shade, which makes it hard to get good pictures.
So we had the Chief Librarian of a prestigious New York university, an Emmy Award winning Film Editor and a practicing Psychiatrist. They were my friends who have became Lenes friends as well. Marie is the sailor in the bunch, with lots of experience with her father in Europe, and took the helm most of the time, but her husband and son took stints. Rafa steered like a Navy Helmsman, taking orders such as "a little to the right" -- because at eight, he can not yet see over the binnacle.

Next up were four of Lenes friends who have become mine as well. Sheila, MJ, Christine and Heather, all repeat sailors whose pictures are in other posts. We put up less sail than normal and went at a slow stately pace that the guests appreciated. We started with reefed main and small jib but finished without the jib.

Then came Ilenes first sail on Bennett and Harrietts new Beneteau. Lene, as I had been, was quite impressed with the boat. I was able to whip the ends of all of her lines that terminate in the cockpit. Another day, not underway, will be needed to get the other ends of these lines. She has a lot less lines than On Eagles Wings.

A work day to get the top of the Genoa working and mostly sanding the cafe doors for another coat of varnish, which could not be applied because the varnish I had had jelled to a solid. I also got two spare fuel filters - expensive little buggers, which, in their boxes are now aboard in zip lock bags to prevent rust.

For the final three days and two nights of sailing, in addition to the human guests, Whitty and Alpha Girl got reacclimated to the boat. That process was hardly an event; they walked about like they owned the place and tried to get into the cabinet where their food is stored. Cats are smart, especially when their dinner is concerned. Alfie is quite at home inside the aft end of the stack pack, atop the boom, when ILENE is on a mooring. The red and black lines are the first and second reefing lines, respectively.
It is warm and quiet in there. But we have to remember always to make sure we see the little devils before we hoist the sails to avoid crushing them. Our human guests during the first of these three days were Jill and Ken, her boyfriend. She is the kitties Vet and he is a family therapist and soon to be published memoirist. Neither of their expert services were required for this voyage, just the pleasure of their company.
The most remarkable thing about this daysail was the tidal effect of the so called "Super Moon" -- which was full and at the point in its orbit closest to the earth, increasing its magnetic effect on the water. Coming north back toward the mooring we passed what is usually safely east of  Stepping Stones Light. The depth sounders beeping alerted us to the fact that the rocky seabed was only seven feet deep -- 16 inches below the bottom of our keel. I veered sharply to starboard to get further away -- toward deeper water. At high hide that day, the water would have been another eight feet deep. The same low tide problem almost prevented us from getting back to our mooring. Other members of our Club, who had intended to race that Friday evening, had to wait for the tide to rise a bit, being stuck in the mud.  We made a groove in the soft mud bottom for about ten yards of our approach to the mooring; inertia carried us through. Our keel is 5.66 feet deep and the water was only 5.6 feet deep. After dinner at the Club, I took our guests to the subway so they could get home and listened to our Clubs mostly amateur but great sounding six piece rock band playing. But it was already 9:30 and my bed time. A calm cool night.
Next day, after breakfast, our guest was Christine, a frequent sailor with us, here with Whitty.
We had the best sailing of the summer so far. We beat deeply into the south end of Little Neck Bay on eight tacks using Main and small jib, then ran out and through the passage behind Stepping Stones off Kings Point, which required three gybes, and finally turned south into Manhassett Bay to the M.B.Y.C. on a single starboard close reach. Lene had the helm most of the way and has mastered the art of taking advantage of puffs that round us up slightly. Our speed rarely dipped under six knots and on the broad reach we were making eight.
MBYC charges $60 for a mooring and has a lovely big pool. We got there late in the afternoon and lounged on the pools deck. It was not at all crowded and we just read. Later the pool attendant told us that our guest mooring fee did not include use of the pool. Apparently this rule resulted from an experience a few years ago when a boater with twelve souls aboard took a mooring and his guests clogged the swimming lanes. But MBCY has a great guest shower which we did use before an excellent dinner in their restaurant. From the restaurant deck, you see the pool in the foreground, their mooring field in mid ground and a wee bit of the east side of City Island under the setting sun.
Another good nights sleep and a good breakfast aboard before sailing back to the Harlem.









Before casting off, however, I finished the improvements that I had been working on. I hung the wool (or maybe cotton) wall hanging of a stylized sailboat that we got in Finland (dare I call it a tapestry?).  (Sorry about the color and underlined nature of this next paragraph; I didnt intend it and cant get out of it!)  I installed a new block at the base of the mast and a new fifth clutch on the starboard side of the coach roof, next to the other four of them there, so the winch there can handle the outhaul. From now on I can change the tension of the foot of the main sail and thereby trim it better without having to go forward to the mast, laying on my back there, having Lene steer up into the wind and hauling on the outhaul line manually. My only mistake was caused by Lewmar, which provided absolutely zero instructions on how to install their clutch. To release the four existing ones, I lift a lever that swivels up and forward on a pin at the forward end of the clutch. So I installed the new one with the lever moving the same way -- which was backward!!
All the others open one way; this new different one, the other!
In other words, when closed, the clutch did not hold the line when you want to lock it, but it did prevent you from tightening the line. But having done all the drilling and bolt and washer selection and grinding and snakeing of the line needed for the first installation, it took only ten more minutes to detach and reattach the clutch the right way. The clutch is fastened to the coach roof reinforced by strong washers, above this removable panel in the cabin ceiling.
This little job used an enormous number of specialized tools and I confess that I was pleased with myself. Thanks go to my rigger, Jeff Lazar, proprietor of Performance Yacht Management, who encouraged me to do it myself and gave me some helpful hints. He had also told me the size of the Allen stud which I installed myself (And I sorely regret that I did not bring my camera to the top of the mast to gain pictures of our clubhouse and mooring field from an altitude of 63.5 feet above sea level. Lene cranked me up and let me down gently. Another time for that photo.) While working from the top of the mast of a nearby boat Jeff also advised me to possibly shorten the strap at the clew of the Genoa to lower it a bit. The last step on the clutch job will be using a punch that Jeff recommended, and a hammer, to drive out a horizontal athwartship pin embedded in the forward end of the boom on which three thumb cleats rotate. They were used to hold the out haul line and the two reefing lines (red and black, remember) in place. Now, that the third and last of them is led to the cockpit, the thumb cleats are worse than superfluous --  they tend to chew up the lines.
Our sail home on Sunday in the late morning was via the shortest logical route on a variety of port reaches, from broad to close. It rained a bit en-route and with more and heavier  rain forecast for the afternoon,  and my shoulder getting sore from too much sailing, we made a short day of it.
Read More..

May 14 Capital Yacht Club DC to Anchorage North of Bluff Point Colonial Beach VA 56 6 Miles

Two observations: 1. From the last bridge in the ICW in South Norfolk, to Maine -- no bridges that we have to worry about!  2. The Washington Channel is the flying lane for helicopters in the DC area, which has lots of them, apparently to keep them out of the way of the runways of Dulles Intl Airport that are parallel to the Chanel. If you stay at the Capital YC -- get used to their noise!

It was cold the past two nights and yesterday and today. So I was warmly bundled for todays 7:00 to 3:45 passage  -- a retracing of our path, back down the Potomac. The early start was dictated by the desire to capture a few hours of good tide.  We went further than Fairview Beach because we had the time and want to go further tomorrow too. Here is Fairview from the channel, above the gate in the lifelines. It shows that this river is w i d e!
Tide was favorable at the start, giving us, with engine, small jib and wind at our back, about 7.5 knots, gradually diminishing to 4.9 and then building back up to 5.9. Going downstream is faster than going upstream.
With the wind behind us the small jib self-jibes at will while the other two sails, though they would have given us more speed, would have been a bear to handle through all the jibes of the twisty river. In fact the Potomac is a pretty easy river to navigate, especially once you have been there. Our electronic chart plotter displays the water more than 20 feet deep, the channel, in light blue, with dark blue for the shallower water at the sides. Red and green buoys are shown and we generally respect them, but if you stay in the light blue, you cant go wrong.
Tonight the wind is predicted from the south at 5 to 10 knots so while we elected to stop in the Potomac, rather than in a harbor, we are on the north side of a bluff which should make the 5 to 10 knots of wind from the south easy to take tonight. We have 60 feet of snubbed chain in 11 feet of water and no other boats in sight. For those with Google Earth who want to know, we are at 38 degrees, 16.6 minutes North; 076 degrees, 59.4 minutes West. Here:

I have tried to show pictures of things you have not seen before, or new views of the old.  Like this style of buoy. Ive never seen such before. They are common on this river. This one has a guest, or squatter, who is hawking "Danger" as we got too close for his comfort. Check the current running past it-- the "bow wave"
Floridian gargantuan houses on the upper Potomac.
A better view, on a non-foggy day, of the huge power transmission towers with strobe lights.
The rivers banks are lined with such cliffs, as if the Potomac is trying to become the Grand Canyon. It still has a way to go.

Maryland Point Light, with rapids flowing past and many birds watching from the man made islands on both sides.



Tomorrows destination: St. Marys, Maryland.


Read More..

Dinghy Cruising Around the Eye of Quebec

This is a good video if you can block out the time - 40 minutes. A duo spend two weeks going around a natural circular body of water in central Quebec, formed by the impact of an asteroid.

From the blurb accompanying the video:

"The Eye of Quebec (Lac Manicouagan) is visible from space as a perfectly ring-shaped lake. Its center island is far larger than the water that surrounds it. 100km in diameter, it is the fourth largest meteor impact site on earth. We sailed around it and think that was the first ever circumnavigation of the reservoir under sail and oar. (We can find record of two other sailboats that have attempted the trip. While were not sure of their success, both appeared to carry auxiliary engines. If it wasnt the wind pulling us it was our backs.)

Three years ago, when John and I drove the Trans-Labrador highway, we camped one night on the shores of the great Manicouaga and it captured our imaginations. Finally, this year, aboard the expedition re-fitted Wayfarer 4610, we made the voyage. We were on the water for about twelve days after a two day drive north. It is an astronomically great lake.

We camped ashore every night, and packed nearly 100 Ibs of dried food for the journey. We wore drysuits most of the time, cause the weather was typically cold and wet!



Circumanic Higher Res from Scott McDougall on Vimeo.

More information on the "Eye of Quebec" from Wikipedia.

Read More..

The need of keeping water out of the bilge of a metal boat

I always start my surveys on metal boats by using Thermal Imaging of the hull. This helps me locate the structural components of the metal boat. I am also looking for trapped moisture and/or water. If this is found, then there is a good chance there will be corrosion. Next I conduct an inspection of the bilge of the boat, including, anchor, sail, cockpit lockers, and lazarettes. Now I have a very good idea where to concentrate my UTM-audio gauge. I take readings of the whole hull, but will do more readings in the areas of concern.

When I see water in a bilge of a metal boat beyond what might be in a sump I get concerned. I would like to see dry bilges on all metal boats, but this is not always possible. On Tuesday I surveyed a steel trawler. Overall this boat looked to be in fair condition, but then I saw the water in the bilge, a lot of it! There was heavy scale in some areas because of the standing water.  I knew this was an area I needed to spend some time getting thickness readings.

The next day I did my audio gauge. My readings indicated plate wastage. In some areas I could not get a reading that most likely is caused by heavy scale. My visual inspection from inside confirmed the heavy scale. When I arrived at the boat I noticed some weeping from what I hoped was paint blisters. Then an hour later water stared streaming from one of the blisters. Just to think only the paint was holding this section of plate together.

The good news! The boat was out of the water it will not sink. Steel boats can fixed; by cropping out the bad plate and adding new. In a short period of time, she will be underway again.

The moral of this story? If you own a metal boat keep an eye on the bilges.

I will post photos in my next post.
Read More..

Our Part in the Harlem Yacht Club Cruise of 2014


Sunday Aug 3 - Work Day on the Mooring

The Club Cruise ran from Aug 1 to 10 but ILENEs part became five nights and five days, with three nights with the main contingent of the Club Cruise in Mattituck and the Seatauket YC on the North Shore of Long Island. I worked four hours the day before we got started. I found the missing green washer for the dinks air pump -- under the dink and made some progress on pumping it up, but it is not right yet. But we will be on anchor, on dock or on a mooring with launch service for this entire mini-cruise so the dink will not needed. So I moved the outboard from the cars trunk, the gas tank from the boat and the air pump from the dock -- all three to the locker with the oars I found located there buried under the winter covers. Also, I am not putting the water maker into service until we leave for the winter -- unless the manual says it cant remain pickled for a whole year. Id hate to foul up that expensive piece of machinery.

Other work included: (1) sawing the three pieces of veneered wood to close up the port aft cabinet to size, though installation requires return of our drill which was lent out; (2) cleaning birds mess off the dodger which needs more scrubbing. Actually is is not guano but fish guts, scales and bones -- birds being such messy eaters;
(3) attempting to knock out the booms thumb cleats, which was not successful, though I did learn that the first reefing line had been led through the forward part of the boom on the wrongside of the thumb cleat, which was what was causing the harm to the line. So by releading and repairing this line I may not have to do the knockout or replace the line; (4) locating and installing the hatch board bag and inserting the boards therein and installing the cafe doors. These doors put me psychologically into cruising mode. Im ready!

Mon August 4 - Prep Day and Sleep Aboard, Anticipating an Early Start

This was mostly a land day for prep, provisioning and packing. We loaded the car, including the cats, and arrived at the Club at 8:30 pm. After getting everything aboard and put away, we slept peacefully in calm water. This was the cats third trip to the boat this season and they did not complain about being locked in their stuffy carrier in the car. I think it is because they have associated the carrier with boating, which they seem to love. So much for my amateur feline psychiatry.
Whitty: "Do I look like Im worried"

Alphie: "Im Captain of all I survey"
Our efforts to keep out flying biting pests at night was thwarted by the cats ability to "break and enter" by pushing in the screens covering the small side opening ports. They want free rein of ILENEs cabin AND exterior, 24/7. But if we close these ports, the screens cannot be pushed through and the cats have to elect between the two sides of the boat: in or out.

Tues August 5 - HYC to Port Jeff Cove

Underway at 7:00 am for six hours. It was eerily still with mist on the water that the sun had not yet burned off but fine visibility. We were the only boat moving. We waved to some fishermen on the Morris YC dock. By nine a.m. there were a few other boats out but far away. We motored the entire way and never set a sail. Normally a sail will stabilize the boat against rocking but the seas were flat calm with occasional 2 or 3 knot winds, so rocking was not a problem. It was a day made for power boaters, who like flat seas, but not for sailors. Perhaps all that great wind in July has blown itself out and we will have to content ourselves with weak weather sailing conditions in August.  
Clouds and Northport stacks mirrored on the water

Our wake, if you can call it that, as if cut through oil
The last time I recall sailing with such views was crossing the Caicos Banks.  See blog: "Judy and Meridel and Turks and Caicos Part 1", April 3, 2012.



 We took someones mooring in the big cove to starboard just past the breakwater in Port Jeff, hoping the owners didnt show up that evening, but there are about seventy private moorings here and only five boats at the maximum. On a weekend its quite different. Lunch, a nap and then chores before dinner, reading and sleep.
My primary chore was removing, repairing and reinserting the first (red) reefing line. The strength of such a braided line is in its core. The outside, which we see, protects the core from chafing and makes it feel better in ones hands. The covering was all bunched around the two ends and about six feet of the white core, where it runs through the boom, were bare. So the first thing I did was to pull on the cover from the ends to the middle, over and over. Gradually the cover moved toward the middle until the bare spot was only about eight inches long. Then I sewed some light thread through the cover and the core, to try to hold things in place. Then red electrical tape was wound around the remaining exposed core. The reefing line certainly carries a heavy load. More experienced sailors who may think this is a bad idea, please chime in. Otherwise, time will tell if this red line parts, and if the storm is severe enough to do this to the red line, there is the second black reefing line waiting to take its load.
My other chore was installation of self adhesive rubber weatherstripping to the underside of the cover of the aft port lazarette -- the propane locker. Practical Sailor magazine told me that this compartment should be locked and watertight, except for a hole in the bottom, through which any propane that leaks from the tank, being heavier than air, could escape outside the boat. We have gotten some water in this lazarette, when heeled in the rain, because it was not watertight. Most of this water escaped through the hole in the bottom but its much better bone dry. The latch went on this past winter and now the weatherstripping.

August 6 - Port Jefferson to Mattituck

We hoisted the main at the mooring at about 8:30 but also used the engine to head north out of Port Jeff, through its wide channel, rather than tack in there. Then northerly winds made the next two hours of our 25 mile eastward passage something of a beam reach and the genoa got to play as well. With full sails, and a bit of help from the tides, we were making speed over ground in excess of two thirds of the apparent wind speed, averaging better than six knots, and without the engines noise. But starting at about 11:00 the winds dropped to behind us and in strength so we had to use the engine the rest of the way. There was a mess in the compartment under the cabinet under the galley sink, which I cleaned up while Lene maintained the watch. She also had the helm from the breakwater up the two mile long bending bayou-like creek to the dock at Strongs Marina. We did this at low tide which made for a nervous time. In the bayou the deep water is not in the center and at times was only five inches below the bottom of our keel. We were on the dock, across from "Blast," Ernie and Camilles big Albin trawler, by 1:30.
This was ILENEs first docking this year except for her initial watering. I worked the afternoon, washing the top of the boat, filling the port water tank and then I caused a very expensive stupid mistake -- by not following the advice I always give to Ilene. "Make sure that the deck fill hole into which you put the water hose says WATER".  Yes, I put the fresh water hose from the dock into the starboard fuel tank. Water being heavier than diesel, it went to the bottom of the tank and pushed a few gallons of diesel fuel out onto the deck and into the water before our neighbor, Bert, yelled that we were spilling fuel. Probably a few gallons, which subjected us to a potential fine and cleanup costs from the Department of Environmental  Protection. I mopped up what I could and did get to the marinas very nice pool to cool off a few minutes before its five PM closure time.
Im sure these guys didnt like my mucking up their home.
I think it was the anticipation of that dip which caused me to not be thinking about the right deck fill. A shower and dinner with our new friends, Bert and Margie of the fast powerboat "Blue Bell" from Mashpee, on the Cape and Florida. Dinner was at Paces Dockside, the restaurant on the marinas grounds. Bert bought a bottle of wine and shared it with me. And another good nights sleep before I had to face the music the next day.

August 7 - Lay Day in Mattituck

The morning was pleasant, with a walk into town to visit the hardware store, post office, book store, grocery, drugstore (for a postcard to send to my granddaughter), cheese store, and wine shop. But the afternoon entailed taking up the entire cabin sole to get to the top opening of the forward fuel tank (where the inoperative fuel gauge is inserted). That hole is inconveniently located directly under the one small piece of the sole that holds all the other pieces together. About 60 1.5" wood screws were removed. John is an excellent mechanic but took three very expensive hours to do what he could have done in a fraction of that time if he had been supplied with a stronger pump attached to larger diameter hoses. Out came the pink diesel fuel and the water, all told about 40 gallons, into five gallon cans which were poured into a fifty five gallon drum that was hauled off to an authorized hazardous waste disposal site. The pumping done, I shooed John out and put the boat back together again myself. Too late for that refreshing dip today. Instead the bitter pill of the bill. Lets just say with the replacement of forty gallons of diesel fuel my mistake cost north of one grand. And I have remarked how proud of myself I am when I accomplish a new task on the boat. So I better fess up about how rotten I feel about a stupid very costly mistake that harmed the environment. I know better and it wont happen again.

Dinner was a pot luck affair at a picnic table in the marina. This would have been better if we had had six or ten boatloads of folks. As it was there was us, Ernie and Camille from "Blast" and Marcia and Mark from "Leeds The Way". 
Marcia is the Clubs current Fleet Captain, a position I held for a few years and that Ernie held for more than 20 years before me.  We love cruising but can do it without the Club, such as our 93 days in Maine last summer. It is sad that those who could benefit from our experience do not avail themselves of this resource. Anyway, there was no shortage of good food and beverages among our tiny group.

August 8 - Mattituck to Seatauket YC, in Port Jefferson Harbor

Underway from 10 to 4:30. We tried to sail and actually did sail a few miles, close hauled, easterly, along the North Shore of L.I. But we tacked to a northerly course and stayed on it too long. Too long because the wind had shifted and we could no longer sail east so we gave it up, keeping the main up for stability and headed directly for the Port Jeff breakwater, with the wind directly in front of us. Turning south to enter the harbor, the wind helped us and we sailed to about 150 yards from the mooring field, headed into the wind, popped the main halyard clutch and expected to hear the familiar "whoosh" of the mainsail tumbling down into its bag. But no whoosh. I went to the mast to tug down on the sails luff. Nothing doing. I told Lene to head back out into the open part of the harbor and watch our depth and for other boats, like this ferry coming out,
while I would get into the bosns chair and she would haul me to the top of the mast (using the spinnaker halyard) where I planned to use pliers to unscrew the shackle and let the sail fall down. Luckily the wind was light, reducing both heeling and our speed. Lene said "Check the mast." Smart girl! Somehow, two loops of the end of the port lazy jack halyard had worked loose from their coil and in fact four lengths of this thinner line had become wedged between the main halyard and the housing of its block at the base of the mast. I managed to get the sail down by pulling the halyard through this block, a few inches and then feet at a time. Once the sail was down and stowed, we were able to take a guest mooring and then came the task of fixing the problem. First I cut the lengths, about 2.5 feet that stuck out from the block. Then I tried pulling the stuck bits out with pliers. I removed the block and its shackle from the base of the mast to make the work easier. Next it was knife, ice pick and pliers, trying to pluck fibers from the errant bits but this was very slow going.

Fluff

Notice how flattened these formerly jammed bits are compared to the width of normal line.
 (If anyone knows how I can get rid of the underlining below, which is unintended, please let me know, thank you.)
I thought to pull the main halyard out of the shackle in the direction I had pulled to get the sail down, to thereby relieve the pressure in the jam. But this would have required use of the snake, to get the line back through its channel under the deck after it was freed. The same snake used earlier on this voyage to repair the reefing line, had been put away in a safe place and could not be found. Lene is the one who always wants things to be put away and I should let her do the putting because she is better at the remembering. In any event, after diligent search, no snake. So another plan was needed. I noticed that the block seemed to be held together with three small Allen bolts and disassembled it. Then everything could be easily removed. A similar jamming had occurred in the block at the clew of the small jib during the passage from Providentiales in the Turks and Caicos to Mayaguana in the Bahamas. Some physicist is going to have to tell me about what force of magnetism draws small lines into the narrow spaces between larger lines and the housings of their blocks.
Free at last.
Roger, Mark, Ernie, Marsha, Lene and Camille -- after ice cream.
Dinner was at La Parilla, good Spanish food, followed by the traditional desert of the Harlem Cruise -- ice cream.

August 9 - Seatauket YC to Harlem YC
Port Jeff waterfront from our mooring; ferry docks to the right.

We got off the mooring at 7:45  and at 8:00. Huh? Well, Lene and I had a "failure to communicate." She did not hear me say "Reverse," to back away form the ball, and took my pointing out where the ball was as a direction to turn toward that side. We drove the boat over the mooring, getting its lines tangled on the propeller. So I got a refreshing early morning salt water dip and got us off in short order, without cutting any lines.  In the harbor we saw about five knots of wind from the north and hoisted the main in anticipation of a beamy starboard reach while we retraced the first days passage, in the opposite direction. We even set the genoa, a couple of times. But the wind died. This time, it being a Saturday, numerous wakes of large high horse-power floating big-ego machines roiled the surface so the main did serve its anti-rocking purpose. A rather boring passage and we were on our mooring at 2:20 and home in our apartment at 4. So, while a lot of things went wrong, everyone got home safely and a good time was had by all.
Read More..

Loads of RC hydrofoils




















Published on May 30, 2013
Very efficient rc boat concept+snowmobile in ONE- RC hydrofoil.
Center of gravity,angles, area, location of the engine batteries, rudder reinforcement - everything from my head and see it swims/float! I recalculated the value of the lower speed of rc model.
,leight - 534 mm,height - 240 mm,breadth - 468 mm, swim weight - 739 g,
motor: KDA 28-47 22T, 135 g + 2x motor heat sink for 380
esc: Turnigy Brushless ESC 35A CAR ESC
servo: Turnigy TGY-930
batt. : 3S. 1800 mAh 25 C, Polyquest /PQ-1800 XP/
propeller: Graupner 2303.32- 32,5 mm, High- performace racing prop.GFK, 2- blade, M4
Camera : SONY DSC H-5
place : Bátovce - Lipovina dam,near from Levice, Slovakia





Tragflügelboot


Read More..

2015 Fall Season A List of Free for alls

Over the years this blog has featured some of the oddball regattas/sailing races where you take your oddball small sailboat and compete against a bunch of other oddball small sailboats. During the fall season there is enough of these events you could, if so inclined, hop-scotch up and down the East Coast of the United States.

They are (in roughly chronological order):

Sebago Cup - mid-September at the Sebago Canoe Club, Brooklyn N.Y.
A one race jaunt around Jamaica Bay. Im sure they would be delighted to see some out-of-town visitors and been told, even though this is Brooklyn, there is plenty of parking around the club. See comments for more info from SCC members.

SEBAGO CUP ----- September 19, 2015
Our annual cruising race!
This is an open class cruising race open to non-members. Fleets will be created upon the participation of at least two boats of the same class. Contact sailing@sebagocanoeclub.org for more information.
Skippers meeting - 11:30 am
Starting gun - 12:30 pm
Notice of Race
Sailing Instructions 


NSHOF Classic Wooden Sailboat Rendezvous- mid-September, Annapolis Maryland.
A one-or-two lap race around the Annapolis Harbor. The majority of entrants are classic cruising keelboats but there is always a smattering of small boats. This year John Z is entering his Classic Moth.


CLASSIC WOODEN SAILBOAT RACE, Sunday ---- September 27, 2015
NOR



MASCF (Mid-Atlantic Small Craft Festival) - First weekend in October, St. Michaels Maryland.

This is more of an event than sailing race but there is, on Saturday, a one-lap sailing race in the river starting around noon that is quite a hoot. I have done it twice in my Classic Moth Tweezer where I was racing in a division featuring a motley assortment of larger craft including Thistles, Core Sound 17s, Blue Jays, Celebritys, log canoes.

MASCF ---- October, 2, 3, 4, 2015

Registration






Tweezer trying to stay ahead of a log canoe - MASCF sailing race

Pollys Folly - mid-October, Megunticook Lake, Camden, Maine.

Hosted by John and Polly Hanson. This is a small affair, hosted out of their lake-front cabin around the time of Maines fall foilage.

Archipelago Rally - early-November - Somewhere in the state of Rhode Island.

In a twist on normal advanced scheduling, the organizers wait until about two weeks before the event before announcing the location. A one lap race, usually going around something.

Read More..

December 14 15 New Smyrna Beach to Titusville and First of Three Lay Days There With Car 35 Miles

Motoring in the ICW is not a peak experience. During this trip and while at Titusville, there was almost no wind. It was sunny and not as cold. I put up a head sail for about an hour but then the wind was gone again. Companions make it more interesting. These guys, from New England, said that they were in training for the spring racing season and wanted to be on our "wake". They kept up with us, motoring at 5.7 knots, for about half an hour before turning back. They said "Were your dolphins!"
We also saw more dolphins than ever before, in small and large pods, close to a hundred total, during the five hours we were underway.
In Titusville one simply takes an available mooring and then calls the Marina to tell them the number. The Indian River is as much as three miles wide but with a depth of only one to six feet, except for the ICW channel with twelve feet depth that is perhaps 50 yards wide. Near Titusville the river has a piece that is seven or eight feet deep and several hundred yards wide. This is the anchorage and mooring field. We took a mooring near the ICW and near the outer end of the private marked channel leading from the ICW to a large marina with many slips that was dredged in the western (mainland) side of the River. The chart showed three low bridges, one shortly before we arrived and two further south. The first is for a railroad and is apparently open unless a train comes. The second was replaced by a beautiful new high expensive bridge, shown here from ILENE at sunrise,
and so only the third requires us to request an opening. I think they made a mistake in deciding which of the two car bridges to replace: the high one leads to the Merritt Island National Wildlife Refuge and is little trafficked. The remaining low automobile bridge also leads to the Kennedy National Space Center at Cape Canaveral and has a lot of cars and buses to be detained. Id be interested in what local politics caused the decision to replace the wrong bridge.
We took both our dinghy lights (so others can see us) and our flashlight (so we could see the unlighted channel markers and find our way home after dark). We had some wine on Autumn Borne with Dean and Susan. They are planning to haul, do their bottom and visit relatives back in Buffalo and will catch up with us later on. Also aboard were the crew of Seeker, Earl and Kathy, and friends who sail but live in Florida and did not have their boat here: Eric, an engineering colleague of Dean, and Joyce, a biker and tennis player, from Holland. When Erik and Joyce had to leave, the rest of us had dinner at Crackerjack, by the foot of that new bridge.
Next day was the first of our three with a rental car. After breakfast out we went to the Kennedy Space Center. We took the bus ride out along the path that the mammoth mover travels carrying the rockets (at one mph), and saw about four videos, each in its own theater, walked through a lot of objects, large and small and heard a great talk by former astronaut Don Thomas, who made four shuttle flights, the highlight of the day, actually.
Each stripe in the flag is eight feet wide!
Lift off!
End of Stage Two, with me, below, to give a sense of scale
Lene by capsule, looking lovely, as usual
.
The Rocket Garden
We were there from 10 to 4 and were quite tired by the end of it. We have access to a movie house here and Interstellar was playing but no, a quiet evening aboard.
The Space Center is operated entirely without government support, it brags: But taxpayers pay for it. Driving there for two seniors includes a $10 parking fee and $97.00 admission. it was not as expensive 25 years ago when I was here last.
Read More..

Zen of Daysailing A Dutch Valk and Jolle Segeln

Every once in a while I intersperse all my posts about planing boats, or racing, or boatbuilding with videos of people just enjoying a daysail and a day on the water. The wind is perfect, not too strong, not too light, the sun is out, the water temperatures are good for swimming. Sailing is best done with the feet up and a smile on the face.

The Dutch Valk klasse is similar size and original concept to the U.S.A.s Lightning class though with a squat traditional gunter rig. It appears the Dutch build them in fiberglass for recreational sailing - the PolyValken. (I think they reserve the wood ones for racing.) By the looks of this video, the Valk fits the recreational role superbly. (I like the cross thwart at the aft end of the cockpit allowing the skipper to recline and steer at the same time.)


Zeilen op de Kagerplassen from Muxio on Vimeo.

Jolle segeln is German for dinghy sailing. Here is a daysail in a true classic German dinghy, wood with traditional fittings. (Video settings doesnt allow me to embed.) Im not sure what the class is, maybe a reader can help out.

Read More..

Music Whenever Bob Dylans cover of It must be Santa

I first heard this song the past week playing on our local radio station, WRNR. Im surprised Ive never before come across Dylans take on the raucous pagan festival side of the holiday. Any song that leads off with an accordion is alright with me and Dylan fits in his customary wordplay among the lyrics by interspersing the name of recent U.S. presidents with the names of Santas reindeer.

Wishing Earwigoagin readers; Happy Holidays or, Happy Turn of the Year. (Whatever floats your boat.)


And for Jim Carreys beautiful rendition of "White Christmas", click here.


Read More..

Mad Man Yellow Boat 2 X Turnigy Heli motors 700 Watts 1850 Grams of thrust measured at 78 Amps

Mad Man Yellow Boat 2 X Turnigy Heli motors > 700 Watts 1850 Grams of thrust measured at 78 Amps


Turnigy Heli series outrunner motors are an excellent upgrade for your helicopter. Built with high quality components, tight windings and genuine NMB ball bearings, these motors provide excellent performance and efficiency at a price that cant be beat! 

Specs:
Operating Voltage: 7.4~14.8V (2~4S lipoly)
RPM: 3800kv
Max Current: 35A
Max Power: 365W
Idle Current: 3.5A
Resistance: 0.018ohms
Shaft: 3.175mm



3mm flex shafts 3 blade impellers cutdown props 45mm pitch

Read More..

Header Photo Sabre Dinghy and the Return of the Retro Singlehanders





The previous header photo is of Aussie Matt Kiely sailing the Australian singlehander Sabre class dinghy. The photo was lifted from the South Gippsland Y.C.Facebook page.

Probably the major trend in dinghy racing over the last 30 or so years has been the growth of singlehanded racing at the expense of doublehanded or triplehanded classes. And the trend since the millenium has been the explosive comeback of  what I call the retro hiking singlehanders; those other singlehanded classes designed before, or around the date of the introduction of the Laser (1969). For the most part, these classes are not international (excepting the OK Dinghy and Europe Dinghy); they are popular country-by-country or region, and they attract fleets of thirty, forty or more boats at major championships. They have a builder or two turning out modern hulls, some have carbon masts, many have aluminum. They seem to fill a need in the marketplace that the Laser does not.

I have compiled a list of retro singlehanders. I have excluded the Olympic Finn - 1949 (which has a huge Masters scene) and singlehanders with hiking assists (trapeze, sliding seat). Feel free to add your thoughts about this list in the comments section. (Before the Sunfish sailors jump all over me for excluding the Sunfish from the list - let me state the Sunfish has maintained high levels of popularity in parts of North America and parts of South America for many, many years - I dont see a comeback in popularity - they just maintained it.):
  • Solo (U.K.) - 1956 - aluminum mast, stayed rig, full battens
  • OK Dinghy (Den.) - 1957 - carbon mast, unstayed rig, short battens
  • Streaker (U,K.) - 1975 - aluminum mast, stayed rig, short battens
  • Phantom (U.K.) - 1971 - carbon mast, stayed rig, short battens
  • Lightning 368 (U.K.) - 1977 - carbon mast, unstayed rig, short battens
  • Sabre (Aus.) - 1974 - aluminum mast, stayed rig, full battens
  • Impulse (Aus.) -1975 - aluminum mast, stayed rig, full battens
  • O-Jolle (Ger.) - 1933 - aluminum mast, stayed rig, short battens
  • Larken-Klasse (Ned.,Ger.) - 1920s - wood mast, stayed rig, full battens 
  • Europe Dinghy (Moth) - 1960 - carbon mast, unstayed rig, short battens
  • Zephyr (NZ) - 1956 - aluminum mast, stayed, full battens
Despite the recent introduction of the "modern" RS Aero, or Devoti D-Zero, with lightweight hulls, mylar sails (correction - the Aero has dacron sails), carbon rigs, it seems the singlehanded market is marching in the other direction. (I must admit the North American market is an anomaly here with not a lot of singlehanded classes under the Laser - still king by a long-shot-, and the Sunfish - a solid runner-up, The other singlehanded classes in North America - like my Classic Moth - are mustering small numbers...Oops! I forgot about the MC scow, now very popular in the U.S.)


Read More..

October 22 26 Sailing Pandora an Aerodyne 47 From North of Essex CT to Hampton VA


This was the third time I have crewed on passages for Bob, the first aboard his new love, Pandora. Before we get to the passage, let me describe her, by reference to his old one, which was a Saga 43, like ILENE.
                        Pandora              ILENE
Length                  47                      43
Beam                    14                      12
Draft                      66"                    58"
Mast Height          64                      63.5
Displacement         11.5 tons           10 tons
So Pandora is the big sister, with a lot more room inside, but not much heavier; due to both longer waterline length and lighter weight she is faster.
Many similarities: Both have the Solent rig for the two headsails, though Pandoras jibs foot is secured to a Hoyt boom, A nice feature is two amidships cleats so that each spring line has its own cleat. She has a solid glassed in hard dodger which is perhaps five feet long, so there is plenty of shelter under the dodger against waves and wind. Unfortunately, that dodger is less than 63" above the deck, resulting in some close encounters with my clumsy noggin. And Pandora has the larger more sophisticated and newer Raymarine instruments with four displays of the chart plotter: (1) at the helm, (2) on the starboard coach roof at the forward end of the cockpit, (3) at the nav station and (4) in the port side pullman berth so the captain can check up on things from his bed! And, like ILENE, she had a head forward of the pullman berth but aft of the chain locker. She has two large lazarettes on the bow, one for the fenders and dock lines and she also has a bow thruster that lowers down from inside the hull when needed and then pushes the bow from side to side. At each side of the cockpit, just aft of the dodger, are two powerful Anderson electric winches to tame the lines which are all led there, and further aft is another pair of winches.


for greater control while still self- tacking. Both boats have the greatest weight at the bottom of the keel, though Pandoras is a bulb rather than a shoe. Pandora has no toe rail and no bolts fastening the edge of the deck to the hull; rather these two major structural parts, both vacuum molded, are glassed together into one very solid piece with a small curve at the edge of the wide side decks. A very clean look.
She has a radar arch and at its port side, on fore and aft sliding tracks, is a davit block for lifting the outboard from the dink.
Friday, October 22
Bob picked me up from the Old Saybrook railroad station about 4 pm. The first thing we did was secure the 15 hp outboard to a pad on the aft rail and hoist up the Caribe fiberglass RIB dink by its nose, over the lifeline and laid it upside down, facing forward under the boom. We deflated it and tied it to itself to make it smaller in order to avoid chafing the lines and increase visibility around it a bit.
Then a delicious dinner at Bobs home cooked by Bob and Brenda, punctuated by the arrival of Gregg and his wife, son and future daughter in law, just in time for desert. After which, we all headed back to the boat so Greggs family could see it and I hit the rack early. I was assigned the quarterberth which is to starboard and has a separate entrance to the aft head. I think I got the best berth on the boat, roomy with no need for a lee cloth, as were rigged for the other berths, and the greatest privacy and shelter from potential cold drafts, while it also boasts three opening ports to catch a breeze in port, though it has two electric fans. Plenty of room for two.
Saturday October 23
In the morning we had to secure the nicely trussed dink to the boat so that potential big waves would not wash it away, rig the lifelines and preventers and deal with one small problem: no autopilot!! Bob did not panic but recalled that the workmen had opened the pod that contains its controls while working on something else. We reopened it, reinserted the plug and voila, the most reliable member of our crew, Auto, was back in action and we were underway at 7 am amidst the fall foliage on the Connecticut River.






Gregg had the helm until we transited Plum Gut and I  took over until we had rounded Montauk Point.
Then Bob set the waypoint as the buoy off Cape May. During our days together I learned that Gregg is a great guy. He has long experience with cat boats and currently has a Nonesuch 33, which he aptly calls a modern cat boat, based on its large sail set on a mast that is forward. He keeps her at a club in Stratford on the Housatonic River. I have never sailed on that river but plan to remedy that deficiency this summer. Gregg also races extensively and wins a lot, on other peoples boats, mostly a Saber 35 in the summer and dinghys during the winter frostbite series. Gregg is also the Director of Bridgeports municipal zoo where he has worked for near four decades and has a great eye for seeing and identifying wildlife, at sea and on land.
We used the main and small jib which provided plenty of power on our port tack broad reach out in the Atlantic with the winds from the northeast. We had one encounter with a Russian freighter which overtook us on our port side and crossed in front of us. It appeared that he would pass less than half a mile from us but Bob called him and he agreed to alter course about five degrees to port and thus passed 2.5 miles away. We enjoyed big ocean rollers, perhaps eight feet high but 100 feet apart that we glided over gently, the most lovely ocean sensation. We were averaging better than eight knots and peaking at more than ten.
Today was our coldest day, and the coldest part was during the day. I kept putting on more layers and ended up with pajamas under my jeans and four heavy long sleeve shirt, all under heavy duty foulie tops and bottoms, two pairs of heavy socks in my sea boots, two pairs of gloves, a watch hat and a scarf. But the chill did not get bad at night.
Bob fed us well on this trip. Today it was toasted muffins with our coffee, Grilled cheese sandwiches and in anticipation of the cold, two large bowls of tortilla soup which included all of the meat of a rotisserie chicken.

Sunday October 24
Not many photos at sea so we take sunrises and sets when we can. I requested and was granted my favorite off watch time: 8 p.m. to midnight, when I usually lose steam. But while I slept the Captains orders were wisely amended. We did not need two watch standers at all times during darkness because we were harnessed and tethered to a jack line in the cockpit, mostly under the dodger except when we periodically scanned the horizon and it was not stormy. As a result of this change, I enjoyed the unexpected and unusual luxury of more than seven consecutive hours off at night, taking the watch again from 3:30 a.m. until about eight.
With just the two of us aboard ILENE, we relieve each other more often.  Bob called the weather guru, Chris Parker, via SSB and we learned that the potential stop in Cape May for a day due to  potential bad weather would not be needed. While the wind would eventually come to our bow, it would not be strong and we could just power through it. So we changed the waypoint from off the Cape May harbor entrance to a buoy off Cape Charles, the northern end of the entrance to Chesapeake Bay, and altered course a few degrees to port.  Checking we saw that the dotted line took us very clse to shallow water off shore so we altered course a few more degrees to port to create a buffer. The GPS computed our arrival at about 11 a.m. and I figured another four hours to get from there to the dock in Hampton.
During the afternoon I did what I like to do on friends boats and put about 20 whippings in the ends of Pandoras lines. The wind got lighter and came around to the port beam. We put up the genoa for a while and later used a motor assist, turning it off when the winds looked like they would let us sail. Some hours we made only six knots and that seemed slow on Pandora but many boats cant go that fast at any wind speed. And we did not get the opportunity to see how Pandora does when heeled because this was a no-heeling trip.
Todays menu: gourmet honey-drizzled boat-baked drop biscuits with the coffee, tuna salad for lunch and a pasta with onions, sausages and cheese for dinner, all with chocolate chip cookies, snack bars and fruit. Like I said, no one went hungry. Bob is both cook and captain, and if the crew is not vigilant he washes the dishes too.
Monday October 25
When I came on about midnight, we were motoring and close hauled under main alone. A peaceful watch until the end when I almost damaged Pandora and made a big bang that got Bob out in a hurry. The wind had come further around so that it was now directly on our nose. So I winched in the mainsail to lie directly fore and aft to serve as a stabilizer. But I did not realize that the preventer was still attached and the bang was the giving way of the short piece of Spectra line that held its block to the base of a stanchion. Bob was correctly concerned that the block snapped back and hit and damaged the boat but he conducted a close inspection by flashlight, followed by another in daylight, which showed that no damage had been done. Whew! I like to improve my friends boats, e.g., the whipping, not damage them. I would not have guessed that the preventer, which is used to avoid the accidental jibe on a broad reach, would be engaged when we were sailing close hauled.
At the mouth of the Chesapeake there was a lot of shipping. I learned something about the Bay: there is no inside channel for deep draft merchant shipping heading south through the Bay from lets say Baltimore to Norfolk. What they have to do is follow the channel SE out of the Bay over the northern tunnel of the Bay Bridge Tunnel, and then go back in heading west in the channel over the southern tunnel. We sailed across this while one of the big guys swung clockwise past our stern. Skies were grey today as compared to the sunshine of the prior days. Here is the portion of the bridge between the two tunnels.
We were tied to the dock at 1:30 pm (elapsed time 55.5 hours for the 350 mile course) and celebrated our safe arrival, Bob to the left.
Gregg and I gave Pandoras exterior a soap and water scrubbing while Bob cleaned the interior. Then we showered, accepted a ride from a friend of Bob to the airport to pick up our car, and dined together at a local place and turned in for the night.

Sunday October 26

We rose, packed, breakfasted, thanked and said good by to Bob, had our picture taken and got underway at 8:45 am. Gregg and I took turns and drove across the Bay Bridge Tunnel whose fare has not risen in many years: still $13. The highways of the Delmarva peninsula have improved a lot in the last few decades, however. I had planned to get off at Fort Washington Avenue and 178th street to take the A train home but realized that there was a better drop off point at the Pelham station of the number 6 train. Gregg took over from there and was able to deliver the car to the New Haven airport before the 6:30 deadline.
Bob wrote a blog on a daily basis during out voyage (Google: sailpandora) and has since taken off from Hampton to Tortola, BVIs with another crew.Godspeed! I will read his blog after I post this one. I suspect he will have different observations about our trip together.
This was my last sail of 2015 though work continues on winterization and improvements, so stay tuned.  All told, on ILENE and other boats I sailed or lived aboard on 190 days of the 360 this calendar year. Im satisfied.
I got home in time to take the subway up to 34th Street for a panel discussion about the history on New Yorks waterways, at the Graduate Center of the City University of New York. I had suggested this program to all Harlemites but was rather glad that none showed up. While I enjoyed it (it was moderated by Russell Shorto, whose book about Dutch New Amsterdam my book group had read) it was rather limited to the Dutch period and would not have satisfied the 21st Century sailor.



Read More..